Journal Menu
Volume 1 Issue 1 (2019), Pages [1] - [154]
INTERFACIAL STRESSES OF BONDED SINGLE-LAP JOINTS UNDER MECHANICAL AND THERMOMECHANICAL LOADS
[1] O. Volkersen, Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten, Luftfarhtforschung 15 (1938), 41-47.
[2] M. Goland and E. Reissner, The stresses in cemented joints, Journal of Applied Mechanics-Transactions of ASME 11(1) (1944), 17-27.
[3] L. F. M. da Silva, P. J. C. das Neves, R. D. Adams and J. K. Spelt, Analytic models of adhesively bonded joints-part I: Literature survey, International Journal of Adhesion and Adhesives 29(3) (2009), 319-330.
DOI: https://doi.org/10.1016/j.ijadhadh.2008.06.005
[4] L. F. M. da Silva, P. J. C. das Neves, R. D. Adams, A. Wang and J. K. Spelt, Analytic models of adhesively bonded joints-part II: Comparative study, International Journal of Adhesion and Adhesives 29(3) (2009), 331-341.
DOI: https://doi.org/10.1016/j.ijadhadh.2008.06.007
[5] L. J. Hart-Smith, Adhesive-Bonded Single-Lap Joints, NASA, CR-112236, 1973.
[6] L. J. Hart-Smith, Adhesive-Bonded Double-Lap Joints, NASA, CR-112235, 1973.
[7] F. Erdogan and M. Ratwani, Stress distribution in bonded joints, Journal of Composite Materials 5(3) (1971), 378-393.
DOI: https://doi.org/10.1177/002199837100500308
[8] F. Delale, F. Erdogan and M. N. Aydinoglu, Stress in adhesively bonded joints: A closed-form solution, Journal of Composite Materials 15(3) (1981), 249-271.
DOI: https://doi.org/10.1177/002199838101500305
[9] D. Chen and
DOI: https://doi.org/10.1115/1.3166976
[10] D. Chen and
DOI: https://doi.org/10.1115/1.2888327
[11] D. Chen and
DOI: https://doi.org/10.1016/0020-7683(92)90020-T
[12] X.-F. Wu, Y. A. Dzenis and K. W. Strabala, Free-edge stresses and progressive cracking in surface coatings of circular torsion bars, International Journal of Solids and Structures 45(7-8) (2008), 2251-2264.
DOI: https://doi.org/10.1016/j.ijsolstr.2007.11.020
[13] N. Pugno and A. Carpinteri, Tubular adhesive joints under axial load, Journal of Applied Mechanics 70(6) (2003), 832-839.
DOI: https://doi.org/10.1115/1.1604835
[14] O. Nemes, F. Lachaud and A. Mojtabi, Contribution to the study of cylindrical adhesive joining, International of Journal of Adhesion and Adhesives 26(6) (2006), 474-480.
DOI: https://doi.org/10.1016/j.ijadhadh.2005.07.009
[15] O. Nemes and F. Lachaud, Modeling of cylindrical adhesively bonded joints, Journal of Adhesion Science and Technology 23(10-11) (2009), 1383-1393.
DOI: https://doi.org/10.1163/156856109X432983
[16] T. Sekercioglu, Strength based reliability of adhesively bonded tubular lap joints, Materials and Design 28(6) (2007), 1914-1918.
DOI: https://doi.org/10.1016/j.matdes.2006.04.004
[17] S. Kumar, Analysis of tubular adhesive joints with a functionally modulus graded bondline subjected to axial loads, International Journal of Adhesion and Adhesives 29(8) (2009), 785-795.
DOI: https://doi.org/10.1016/j.ijadhadh.2009.06.006
[18] C. Yang and Z. D. Guan, Stress analysis of composite pipe joints under combined torsional and tensile loading, Journal of Pressure Vessel Technology 131(5) (2009); Article 051210.
DOI: https://doi.org/10.1115/1.3151810
[19] B. A. Bednarcyk, J. Zhang, C. S. Collier, Y. Bansal and M. J. Pindera, Analysis tools for adhesively bonded composite joints, Part 1: Higher-order theory, AIAA Journal 44(1) (2006), 171-180.
DOI: https://doi.org/10.2514/1.12061
[20] Q. T. Luo and L. Y. Tong, Closed form solutions for nonlinear analysis of single-sided bonded composite patch repairs, AIAA Journal 45(12) (2007), 2957-2965.
DOI: https://doi.org/10.2514/1.30108
[21] Q. T. Luo and L. Y. Tong, Analytical solutions for nonlinear analysis of composite single-lap adhesive joints, International Journal of Adhesion and Adhesives 29(2) (2009), 144-154.
DOI: https://doi.org/10.1016/j.ijadhadh.2008.01.007
[22] J. J. Radice and J. R. Vinson, On the analysis of adhesively bonded structures: A high order semi-elastic adhesive layer model, Composites Science and Technology 68(2) (2008), 376-386.
DOI: https://doi.org/10.1016/j.compscitech.2007.06.024
[23] Z. S. Wu, H. Yuan and H. D. Niu, Stress transfer and fracture propagation in different kinds of adhesive joints, Journal of Engineering Mechanics 128(5) (2002), 562-573.
DOI: https://doi.org/10.1061/(ASCE)0733-9399(2002)128:5(562)
[24] H. Yuan, J. G. Teng, R. Seracino, Z. S. Wu and J. Yao, Full-range behavior of FRP-to-concrete bonded joints, Engineering Structures 26(5) (2004), 553-565.
DOI: https://doi.org/10.1016/j.engstruct.2003.11.006
[25] K. Leffler, K. S. Alfredsson and U. Stigh, Shear behaviour of adhesive layers, International Journal of Solids and Structures 44(2) (2007), 530-545.
DOI: https://doi.org/10.1016/j.ijsolstr.2006.04.036
[26] A. Carpinteri, P. Cornetti and N. Pugno, Edge debonding in FRP strengthened beams: Stress versus energy failure criteria, Engineering Structures 31(10) (2009), 2436-2447.
DOI: https://doi.org/10.1016/j.engstruct.2009.05.015
[27] A. J. Curley, H. Hadavinia, A. J. Kinloch and A. C. Taylor, Predicting the service-life of adhesively-bonded joints, International Journal of Fracture 103(1) (2000), 41-69.
DOI: https://doi.org/10.1023/A:1007669219149
[28] F. Mortensen and O. T. Thomsen, Analysis of adhesive bonded joints: A unified approach, Composites Science and Technology 62(7-8) (2002), 1011-1031.
DOI: https://doi.org/10.1016/S0266-3538(02)00030-1
[29] C. D. M. Liljedahl, A. D. Crocombe, M. A. Wahab and I. A. Ashcroft, Damage modelling of adhesively bonded joints, International Journal of Fracture 141(1-2) (2006), 147-161.
DOI: https://doi.org/10.1007/s10704-006-0072-9
[30] M. Quaresimin and M. Ricotta, Fatigue behaviour and damage evolution of single lap bonded joints in composite material, Composites Science and Technology 66(2) (2006), 176-187.
DOI: https://doi.org/10.1016/j.compscitech.2005.04.026
[31] C.-S. Ban, Y. H. Lee, J.-H. Choi and J.-H. Kweon, Strength prediction of adhesive joints using the modified damage zone theory, Composite Structures 86(1-3) (2008), 96-100.
DOI: https://doi.org/10.1016/j.compstruct.2008.03.016
[32] P. A. Gustafson and A. M. Wass, The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively boned joints, International Journal of Solid and Structures 46(10) (2009), 2201-2215.
DOI: https://doi.org/10.1016/j.ijsolstr.2008.11.016
[33] J. Q. Cheng and F. Taheri, A novel smart adhesively bonded joint system, Smart Materials and Structures 14(5) (2005), 971-981.
DOI: https://doi.org/10.1088/0964-1726/14/5/035
[34] J. Q. Cheng, F. Taheri and H. P. Han, Strength improvement of a smart adhesive bonded joint system by partially integrated piezoelectric patches, Journal of Adhesion Science and Technology 20(6) (2006), 503-518.
DOI: https://doi.org/10.1163/156856106777213285
[35] J. W. Kwon, W. S. Chin and D. G. Lee, Piezoelectric monitoring of the reliability of adhesive joints, Journal of Adhesion Science and Technology 17(6) (2003), 777-796.
DOI: https://doi.org/10.1163/156856103321645158
[36] J. Q. Cheng, X. X. Wu, G. Q. Li, F. Taheri and S. S. Pang, Development of a smart composite pipe joint integrated with piezoelectric layers under tensile loading, International of Journal of Solids and Structures 43(17) (2006), 5370-5385.
DOI: https://doi.org/10.1016/j.ijsolstr.2006.01.001
[37] M. A. Khan,
DOI: https://doi.org/10.1016/j.ijmecsci.2018.08.017
[38] R. Hadj-Ahmed, G. Foret and A. Ehrlacher, Stress analysis in adhesive joints with a multiparticle model of multilayered materials (M4), International Journal of Adhesion and Adhesives 21(4) (2001), 297-307.
DOI: https://doi.org/10.1016/S0143-7496(00)00034-8
[39] A. D. Diaz, R. Hadj-Ahmed, G. Foret and A. Ehrlacher, Stress analysis in a classical double lap, adhesively bonded joint with a layerwise model, International Journal of Adhesion and Adhesives 29(1) (2009), 67-76.
DOI: https://doi.org/10.1016/j.ijadhadh.2008.01.004
[40] S. A. Yousefsani and M. Tahani, Accurate determination of stress distribution in adhesively bonded homogeneous and heterogeneous double-lap joints, European Journal of Mechanics A 39 (2013), 197-208.
DOI: https://doi.org/10.1016/j.euromechsol.2012.12.001
[41] S. A. Yousefsani and M. Tahani, Analytic solutions for adhesively bonded composite single-lap joints under mechanical loadings using full layerwise theory, International Journal of Adhesion and Adhesives 43 (2013), 32-41.
DOI: https://doi.org/10.1016/j.ijadhadh.2013.01.012
[42] S. A. Yousefsani and M. Tahani, Edge effects in adhesively bonded composite joint integrated with piezoelectric patches, Composite Structures 200 (2018), 187-194.
DOI: https://doi.org/10.1016/j.compstruct.2018.05.071
[43] X.-F. Wu and R. A. Jenson, Semianalytic stress-function variational approach for the interfacial stresses in bonded joints, Journal of Engineering Mechanics 140(11) (2014), 04014089.
DOI: https://doi.org/10.1061/(ASCE)EM.1943-7889.0000803
[44] X.-F. Wu and R. A. Jenson, Stress-function variational method for stress analysis of bonded joints under mechanical and thermal loads, International Journal of Engineering Science 49(3) (2011), 279-294.
DOI: https://doi.org/10.1016/j.ijengsci.2010.11.005
[45] X.-F. Wu and Y. H. Zhao, Stress-function variational method for interfacial stress analysis of adhesively bonded joints, International Journal of Solids and Structures 50(25-26) (2013), 4305-4319.
DOI: https://doi.org/10.1016/j.ijsolstr.2013.09.002
[46] X.-F. Wu, R. A. Jenson and Y. H. Zhao, Stress-function variational approach to the interfacial stresses and progressive cracking in surface coatings, Mechanics of Materials 69(1) (2014), 195-203.
DOI: https://doi.org/10.1016/j.mechmat.2013.10.004
[47] Z. G. Suo and J. W. Hutchinson, Interface crack between two elastic layers, International Journal of Fracture 43(1) (1990), 1-18.
DOI: https://doi.org/10.1007/BF00018123
[48] J. W. Hutchinson and Z. G. Suo, Mixed mode cracking in layered materials, Advance in Applied Mechanics 29 (1991), 63-191.
DOI: https://doi.org/10.1016/S0065-2156(08)70164-9
[49] H.-H. Yu, M. Y. He and J. W. Hutchinson, Edge effects in thin film delamination, Acta Materialia 49(1) (2001), 93-107.
DOI: https://doi.org/10.1016/S1359-6454(00)00293-7
[50] X.-F. Li, Closed-form solution for a mode-III interface crack between two bonded dissimilar elastic layers, International Journal of Fracture 109(2) (2001), 3-8.
DOI: https://doi.org/10.1023/A:1010960305812
[51] X.-F. Wu and Y. A. Dzenis, Closed-form solution for a mode-III interfacial edge crack between two bonded dissimilar elastic strips, Mechanics Research Communications 29(5) (2002), 407-412.
DOI: https://doi.org/10.1016/S0093-6413(02)00317-8
[52] X.-F. Wu, E. Lilla and W.-S. Zou, A semi-infinite crack between two bonded dissimilar elastic strips, Archive of Applied Mechanics 72(8) (2002), 630-636.
DOI: https://doi.org/10.1007/s00419-002-0240-y
[53] H.-H. Yu and J. W. Hutchinson, Delamination of thin film strips, Thin Solid Films 423(1) (2003), 54-63.
DOI: https://doi.org/10.1016/S0040-6090(02)00973-2
[54] X.-F. Wu, Y. A. Dzenis and W.-S. Zou, Interfacial edge crack between two bonded dissimilar orthotropic strips under antiplane point loading, Zeitschrift fur Angewandte Mathematik und Mechanik 83(6) (2003), 419-422.
DOI: https://doi.org/10.1002/zamm.200310063
[55] X.-F. Wu, Y. A. Dzenis and T.-Y. Fan, Two semi-infinite interfacial cracks between two bonded dissimilar elastic strips, International of Journal of Engineering Science 41(55) (2003), 1699-1710.
DOI: https://doi.org/10.1016/S0020-7225(03)00107-1
[56] X.-F. Wu, Y. A. Dzenis and
DOI: https://doi.org/10.1515/IJNSNS.2004.5.4.347
[57] X.-F. Li and K. Y. Lee, Closed-form solution for an orthotropic elastic strip with a crack perpendicular to the edges under arbitrary anti-plane shear, Zeitschrift fur Angewandte Mathematik und Mechanik 89(5) (2009), 370-382.