Browse Journals

 [1] A. C. Walker, A Brief Review of Plate Buckling Research, the Behavior of Thin-Walled Structures, Elsevier, London, 1984.

[2] P. P. Bijlaard and G. P. Fisher, Interaction of Column and Local Buckling in Compression Members, NACA Technical Note 2640, 1952.

[3] P. P. Bijlaard and G. P. Fisher, Column Strength of H-Sections and Square Tubes in the Post-Buckling Range of Component Plates, NACA Technical Note 2994, 1953.

[4] H. Rodrigues, A. Arêde, H. Varum and A. G. Costa, Experimental evaluation of rectangular reinforced concrete column behaviour under biaxial cyclic loading, Earthquake Engineering Structural Dynamics 42(2) (2013), 239-259.

DOI: https://doi.org/10.1002/eqe.2205  

[5] M. Avcar, Elastic buckling of steel columns under axial compression, American Journal of Civil Engineering 2(3) (2014), 102-108.

DOI: https://doi.org/10.11648/j.ajce.20140203.17

[6] A. Kervalishvili and L. Talvik, Modified procedure for buckling of steel columns at elevated temperatures, Journal of Constructional Steel Research 127 (2016), 108-119.

DOI: https://doi.org/10.1016/j.jcsr.2016.07.008

[7] J. Jiang, J. Zhang, J. Liu, S. Chiew and C. K. Lee, Effect of welding and heat treatment on strength of high-strength steel columns, Journal of Constructional Steel Research 151 (2018), 238-252.

DOI: https://doi.org/10.1016/j.jcsr.2018.09.027

[8] K. J. R. Rasmussen and G. J. Hancock, Tests of high strength steel columns, Journal of Constructional Steel Research 34(1) (1995), 27-52.

DOI: https://doi.org/10.1016/0143-974X(95)97296-A

[9] L. Schuman and G. Back, Strength of Rectangular Flat Plates Under Edge Compression, NACA Report No. 356, 1930.

[10] T. Karman, E. E. Sechler and L. H. Donnel, The strength of thin plates in compression, Trans ASME (1932).

[11] T. R. Graves Smith, The Ultimate Strength of Locally Buckled Columns of Arbitrary Length, the Thin-Walled Steel Constructions, Symposium University College, Swansea, 1967.

[12] W. Flugge, Stresses in Shells, Julius Springer, Berlin, 1960.

DOI: https://doi.org/10.1007/978-3-662-01028-0

[13] S. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill Publishing Co., Inc., New York, N.Y., 1960.