Journal Menu
Volume 1 Issue 1 (2019), Pages [1] - [154]
ESTIMATION OF CRITICAL DIMENSIONS FOR THE CRACK AND PITTING CORROSION DEFECTS IN THE OIL STORAGE TANK USING FINITE ELEMENT METHOD AND TAGUCHI APPROACH
[1] J. Underwood, Stress intensity factors for internally pressurized thick-walled cylinders, Stress Analysis and Growth of Cracks, ASTM STP 513 (1997), 59-70.
[2] I. S. Raju and J. C. Newman, Stress-intensity factor for internal and external surface cracks in cylindrical vessels, Journal of Pressure Vessel Technology 104(4) (1982), 293-298.
DOI: https://doi.org/10.1115/1.3264220
[3] A. Carpinteri, Shape change of surface cracks in round bars under cyclic axial loading, International Journal of Fatigue 15(1) (1993), 21-26.
DOI: https://doi.org/10.1016/0142-1123(93)90072-X
[4] A. Carpinteri, R. Brighenti and A. Spagnoli, Part-through cracks in pipes under cyclic bending, Nuclear and Engineering Design 185(1) (1998), 1-10.
DOI: https://doi.org/10.1016/S0029-5493(98)00189-7
[5] M. Fonte and M. Freitas, Stress intensity factors for semi-elliptical surface cracks in round bars under bending and torsion, International Journal of Fatigue 21(5) (1999), 457-463.
DOI: https://doi.org/10.1016/S0142-1123(98)00090-5
[6] M. Fonte, E. Gomes and M. Freitas, Stress intensity factors for semi-elliptical surface cracks in round bars subjected to mode I (bending) and mode III (torsion) loading, Multiaxial Fatigue and Fracture, 25 ESIS Publication (1999), 249-260.
DOI: https://doi.org/10.1016/S1566-1369(99)80019-3
[7] G. S. Bhuyan, E. J. Sperling, G. Shen, H. Yin and M. D. Rana, Prediction of failure behavior of a welded pressure vessel containing flaws during a hydrogen-charged burst test, Journal of Pressure Vessel Technology 121(3) (1999), 246-251.
DOI: https://doi.org/10.1115/1.2883699
[8] A. Carpinteri, R. Brighenti and A. Spagnoli, Fatigue growth simulation of part-through flaws in thick-walled pipes under rotary bending, International Journal of Fatigue 22(1) (2000), 1-9.
DOI: https://doi.org/10.1016/S0142-1123(99)00115-2
[9] Development of Accept Reject Criteria for Requalification of High Pressure Steel and Aluminium Cylinder, The Center of Nondestructive Testing Information Analysis, Final Report, July 2002.
[10] A. R. Shahani and S. E. Habibi, Calculation of stress intensity factors for semi-elliptical surface cracks in thick-walled cylinders under bending moment-Part I: Numerical simulation, 14th Annual International Conference of Iranian Society of Mechanical Engineering,
[11] A. R. Shahani, M. Mohammadi Shoja, A. Fazli and M. Hosseinali, Calculation of stress intensity factors for semi-elliptical surface cracks in thick-walled cylinders under bending moment-Part II: Experimental observations, 14th Annual International Conference of Iranian Society of Mechanical Engineering,
[12] C. D. Wallbrink, D. Peng and R. Jones, Assessment of partly circumferential cracks in pipes, International Journal of Fracture 133(2) (2005), 167-181.
DOI: https://doi.org/10.1007/s10704-005-0628-0
[13] A. R. Shahani and S. E. Habibi, Stress intensity factors in a hallow cylinder containing a circumferential semi-elliptical crack subjected to combined loading, International Journal of Fatigue 29(1) (2007), 128-140.
DOI: https://doi.org/10.1016/j.ijfatigue.2006.01.017
[14] A. Kaptan and Y. Kisioglu, Determination of burst pressure and failure locations of vehicle LPG cylinders, International Journal of Pressure Vessels and Piping 87(4) (2007) 451-459.
DOI: https://doi.org/10.1016/j.ijpvp.2007.02.004
[15] N. Kasai, Y. Fujiwara, K. Sekine and T. Sakamoto, Evaluation of back-side flaws of the bottom plates of an oil-storage tank by the RFECT, NDT & E International 41(7) (2008), 525-529.
DOI: https://doi.org/10.1016/j.ndteint.2008.05.002
[16] J. S. Kim, D. H. An, S. Y. Lee and B. Y. Lee, A failure analysis of fillet joint cracking in an oil storage tank, Journal of Loss Prevention in the Process Industries 22(6) (2009), 845-849.
DOI: https://doi.org/10.1016/j.jlp.2009.08.014
[17] L. A. Godoy and J. C. Batista-Abreu, Buckling of fixed-roof aboveground oil storage tanks under heat induced by an external fire, Thin-Walled Structures 52 (2012), 90-101.
DOI: https://doi.org/10.1016/j.tws.2011.12.005
[18] L. Yang, Z. Chen, G. Cao, C. Yu and
DOI: https://doi.org/10.1016/j.ijpvp.2012.10.006
[19] N. Kasai, S. Mori, K. Tamura, K. Sekine, T. Tsuchida and Y. Serizawa, Predicting maximum depth of corrosion using extreme value analysis and Bayesian inference, International Journal of Pressure Vessels and Piping 146 (2016), 129-134.
DOI: https://doi.org/10.1016/j.ijpvp.2016.08.002
[20] X. Cheng, W. Jing, C. Yin and C. Li, Stability parameter analysis of a composite foundation of an oil storage tank in a loess area treated with compaction piles, Soils and Foundations 58(2) (2018), 306-318.
DOI: https://doi.org/10.1016/j.sandf.2018.02.004
[21] H. Shigeno and D. E. Katsutomo, Okamoto corrosion of bottom plate of oil storage tank and corrosion control, Nakagawa Corrosion Protecting Company, Ltd.
[22] Alan W. Pence, Failure Avoidance in Welded Fabrication, October, 1988.
[23] A. Higdon, E. H. Ohlsen, W. B. Stiles, J. A. Weese and W. F. Riley, Mechanics of materials, Fourth Edition, John Wiley and Sons, 1985.
[24] ABAQUS Analysis User Manual, Version 6.6, Hibbit, Karlsson & Sorensen Inc., 2006.
[25] MSC/PATRAN & MSC/NASTRAN Analysis User Manual, 2001.
[26] X. Liu, S. Zhao, Y. Qin, J. Zhao and W. A. Wan-Nawang, A parametric study on the bending accuracy in micro W-bending using Taguchi method, Measurement 100 (2017), 233-242.
DOI:https://doi.org/10.1016/j.measurement.2016.12.007
[27] A. M. Hebbale and M. S. Srinath, Taguchi analysis on erosive wear behavior of cobalt based microwave cladding on stainless steel AISI-420, Measurement 99 (2017), 98-107.
DOI: https://doi.org/10.1016/j.measurement.2016.12.024
[28] K. Abd, K. Abhary and R. Marian, Multi-objective optimization of dynamic scheduling in robotic flexible assembly cells via fuzzy-based Taguchi approach, Computers & Industrial Engineering 99 (2016), 250-259.
DOI: https://doi.org/10.1016/j.cie.2016.07.028
[29] N. Pandey, K. Murugesan and H. R. Thomas, Optimization of ground heat exchangers for space heating and cooling applications using Taguchi method and utility concept, Applied Energy 190 (2017), 421-438.
DOI: https://doi.org/10.1016/j.apenergy.2016.12.154
[30] L. Zhao, Y. Zhao, C. Bao, Q. Hou and A. Yu, Optimisation of a circularly vibrating screen based on DEM simulation and Taguchi orthogonal experimental design, Powder Technology 310 (2017), 307-317.
DOI: https://doi.org/10.1016/j.powtec.2017.01.049
[31] R. Chauhan, T. Singh, N. Kumar, A. Patnaik and N. Thakur, Experimental investigation and optimization of impinging jet solar thermal collector by Taguchi method, Applied Thermal Engineering 116 (2017), 100-109.