Browse Journals

[1] J. Postlethwaite, M. H. Dobbin and K. Bergevin, Corrosion 42 (1986), 514-524.

 

[2] G. T. Burstein and K. Sasaki, Electrochim. Acta 46 (2001), 3675-3683.

 

[3] B. Poulson, Corrosion Science 23(4) (1983), 391-430.

 

[4] B. T. Lu and J. L. Luo, J. Phys. Chem. B 110 (2006), 4217-4231.

 

[5] ASTM G15-05, Standard Terminology Relating to Corrosion and Corrosion Testing, Annual Book of ASTM Standards, Vol. 03.02, Wear and Erosion, Metal Corrosion, West Conshohocken, PA, (2005), 65-68.

 

[6] J. Postlethwaite and S. Nesic, Erosion-Corrosion in Single and Multiphase Flow, Uhlig’s Handbook, 2nd Edition by W. Revie, John Wiley & Sons, Inc., (2000), 249-272.

 

[7] R. J. K. Wood, Wear 261 (2006), 1012-1023.

 

[8] P. B. Poulson, Erosion-Corrosion, in Corrosion, L. L. Shreir, R. A. Jarman, G. T. Burstein, (ed.) \ 3rd Edition, Elsevier, (1994), 293-303.

 

[9] K. D. Efird, Corrosion 2000, Paper No. 52, NACE International, Huston, TX, 2000.

 

[10] I. Owen and J. Madadnia, ASME, Fluids Engineering Division, (Publication), V. 226, Cavitation and Gas-Liquid Flow in Fluid Machinery and Devicesm (1995), 59-62.

 

[11] K. T. Kembaiyan and K. Keshavan, Wear 186-187 (1995), 487-492.

 

[12] R. Hamzah, D. J. Stephenson and J. E. Strutt, Wear 186-1987 (1995), 493-496.

 

[13] A. Procyk, M. Whitelock and S. Ali, Oil & Gas Journal (1998), 80-90.

 

[14] P. Andrews, T. F. Illson and S. J. Mathews, Wear 233-235 (1999), 568-574.

 

[15] H. M. Clark and R. J. Lwellyn, Wear 250 (2003), 206-218.

 

[16] C. Wang, A. Neville, S. Ramachandran and V. Jovancicevic, Wear 258 (2005), 649-658.

 

[17] J. R. Shaley, S. A. Shirazi, E. Dayalan and E. F. Rybicki, Corrosion 54 (1998), 972-978.

 

[18] D. Raghu, B. McKee, C. Sheriff and J. B. C. Wu, Corrosion’01, Paper No. 513, NACE International, TX, USA, 2001.

 

[19] R. D. Kane and M. S. Cayard, Corrosion’02, Paper No. 555, NACE International, Houston, TX, USA, 2002.

 

[20] Z. Klenowicz, K. Darowicki, S. Krakowiak and A. Krakowiak, Mater. Corr. 54 (2003), 181-187.

 

[21] X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao and W. Ke, Wear 256 (2004), 134-141.

 

[22] P. McLintyre, Marine Corrosion Club Meeting, Aberdeen, 1999.

 

[23] R. J. K. Wood, T. F. Jones, N. J. Miles and J. Ganeshalingam, Wear 250 (2001), 770-778.

 

[24] B. Poulson, Wear 233-235 (1999), 497-405.

 

[25] A. Neville, T. Hodgkiess and J. T. Dallas, Wear 186-187 (1995), 497-507.

 

[26] M. Matsumura and Y. Oka, Slurry Erosion-Corrosion on Commercial Pure Iron in Fountain-Jet Facility, Proc. 7th Int. Conf. on Erosion by Liquid and Solid Impact, Cambridge, UK, Cavendish Lab. University of Cambridge, (1987), 40.

 

[27] X. Hu and A. Neville, Wear 258 (2005), 641-648.

 

[28] Z. Yue, P. Zhou and J. Shi, Wear of Materials, (ASME, New York, 1987), 763-771.

 

[29] B. W. Madson, Wear 123 (1988), 127-142.

 

[30] C. H. Pitt and Y. M. Chang, Corrosion 42 (1986), 312-317.

 

[31] ASTM G119-04, Standard Guide for Determining Synergism between Wear and Corrosion, West Conshohocken, PA, (2006), 519-523.

 

[32] S. W. Watson, F. J. Friederdorf, B. W. Madson and S. D. Cramer, Wear 181-183 (1995), 476-484.

 

[33] M. M. Stack, International Materials Reviews 50 (2005), 1.

 

[34] B. W. Madson, Wear 123 (1988), 127-136.

 

[35] ASTM G59-97, Conducting Potentiodynamic Polarization Resistance Measurement, West Conshohocken, PA, (2005), 519-523.

 

[36] ASTM G5-94, Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements, West Conshohocken, PA, 1994.

 

[37] B. T. Lu, K. Wang, X. M. Wan and J. L. Luo, Degradations of Mechanical Properties in Surface Layer and Erosion Resistance of Carbon Steel in Slurries with Different pH and Chemical Compositions, in this Conference, 2008, Submitted to Corrosion, 2008.

 

[38] J. Postlethwaite, Corrosion 37 (1981), 1-5.

 

[39] A. Neville and X. Hu, Wear 250-251 (2001), 1284-1294.

 

[40] Y. Li, G. T. Burstein and I. M. Hutchings, Wear 186-187 (1995), 515-522.

 

[41] P. Christodoulou, A. Drotlew and W. Gutowski, Wear 211 (1997), 129.

 

[42] V. A. Pugsley and C. Allen, Wear 233-235 (1999), 93.

 

[43] M. C. Wang, S. Z. Ren, X. B. Wang and S. Z. Li, Wear 160 (1993), 259.

 

[44] X. Huang and Y. Wu, J. Mater. Eng. Perform. 7 (1998), 463.

 

[45] H. M. Clark, Wear 152 (1992), 223-240.

 

[46] W. Blatt, W. Kohloey, U. Lotz and E. Heitz, Corrosion 45 (1989), 793.

 

[47] I. M. Hutchings, The Erosion of Materials by Liquid Flow, MTI Publication No. 25, Materials Technology Institute of the Chemical Process Industries, Inc., 1986.

 

[48] B. T. Lu, J. F. Lu and J. L. Luo, Corros. Sci. 53 (2011), 1000-1008.

 

[49] M. Bjordal, E. Bardal, T. Rogne and T. G. Eggen, Surface and Coatings Technology 70 (1005), 215.

 

[50] S. Das, D. P. Mondal, O. P. Modi and R. Dasgupta, Wear 231 (1999), 195.

 

[51] B. K. Prasad, Wear 238 (2000), 151.

 

[52] B. T. Lu and J. L. Luo, Electrochimica Acta 53 (2008), 7022-7031.

 

[53] A. Neville and T. Hodgkiess, British Corrosion Journal 32 (1997), 197.

 

[54] B. Poulson, Corrosion Science 23 (1983), 391.

 

[55] ASTM G76-05, Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jet, West Conshohocken, PA, (2006), 310-315.

 

[56] ASTM G134-95, Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet, West Conshohocken, PA, (2006), 559-571.

 

[57] ASTM G72-04, Standard Practice for Liquid Impingement Erosion Testing, West Conshohocken, PA, (2006), 273-290.

 

[58] D. C. Silverman, Corrosion 60 (2004), 1003-1024.

 

[59] J. Postlethwaite, M. H. Dobbin and K. Bergevin, Corrosion 42 (1986), 514-521.

 

[60] T. V. Chen, A. A. Moccari and D. D. Mcdonald, Corrosion 48 (1992), 239-255.

 

[61] B. Poulson, Corrosion Science 23 (1983), 391-430.

 

[62] E. Heitz, Corrosion 47 (1991), 135-145.

 

[63] J. S. Newman and K. E. Thomas-Alyea, Electrochemical Systems, Wiley-IEEE, (2004), 378-400.

 

[64] B. Poulson, Corrosion Science 30 (1990), 743-746.

 

[65] C. W. Chen. T. Yu, B. T. Lu and J. L. Luo, Corrosion during Waster Slurry Transportation.

 

[66] E. Heitz, Corrosion 47 (1991), 135-145.

 

[67] D. D. Mcdonald, J. Electrochem. Soc. 196 (1992), 3434-3449.

 

[68] S. Sikora, J. Sikora and D. D. Mcdonald, Electrochim. Acta 41 (1996), 783.

 

[69] P. Andrews, I. F. Illson and S. J. Mathews, Wear 233-235 (1999), 568-574.

 

[70] API RP 14E: Recommended Practice for Design and Installation of Offshore Production Platform Piping System, Washington DC, API, 1991.

 

[71] B. D. Craig, Mater. Perform. (1998), 59-60.

 

[72] M. Seo and M. Chiba, Electrochimica Acta 47 (2001), 319-325.

 

[73] ASM Metals Handbook, 13, 624, ASM Metals Park, Ohio, 1981.

 

[74] K. D. Efird, Corrosion 33 (1976), 3.

 

[75] V. L. Streeter, E. B. Wylie and K. W. Bedford, Fluid Mechanics, 9th Edition, McGraw-Hill, New York, 291 (1998m), 105.

 

[76] R. H. Perry and D. Green, Editors, Perry’s Chemical Engineers’ Handbook, 7th Edition, McGraw-Hill, New York, (1998), 6-10.

 

[77] G. Schmitt, C. Werner and M. J. Schoning, Corrosion’02, Paper No. 280, NACE International, TX, USA, 2002.

 

[78] B. C. Syrett, Corrosion 32 (1975), 242.

 

[79] B. T. Lu and J. L. Luo, Electrochimica Acta 56 (2010), 559-565.

 

[80] H. X. Guo, B. T. Lu and J. L. Luo, Electrochimica Acta 51 (2006), 5341-5348.

 

[81] K. Sasaki and G. T. Burstein, Philosophical Magazine Letters 80 (2000), 489-493.

 

[82] B. T. Lu, J. L. Luo and H. Y. Ma, J. Electrochem. Soc. 154 (2007), C159-C168.

 

[83] R. W. Staehle, Corrosion Science 49 (2007), 7-19.

 

[84] R. Oltra, B. Chapey and L. Renaud, Wear 186-187 (1995), 533.

 

[85] B. T. Lu, L. C. Mao and J. L. Luo, Electrochimica Acta 56 (2010), 85-95.

 

[86] A. Levy, Gas-Solid Particle Erosion and Erosion-Corrosion of Metals, Uhlig’s Handbook, 2nd Edition by W. Revie, John Wiley & Sons, Inc., (2000), 273-293.

 

[87] H. C. Meng and K. C. Ludema, Wear 181-183 (1995), 443-457.

 

[88] R. W. Lyczkowski and J. Bouillard, Progress in Energy and Combustion Science 28 (2002), 543-602.

 

[89] W. Tsai, J. A. C. Humphrey, I. Cornet and A. Levy, Wear 68 (1981), 289-303.

 

[90] G. Sundararajan, Wear 186-187 (1995), 129-144.

 

[91] B. T. Lu, J. F. Lu and J. L. Luo, Corros. Sci. 53 (2011), 1000-1008.

 

[92] H. X. Guo, B. T. Lu and J. L. Luo, Electrochimica Acta 51 (2005), 315-323.

 

[93] K. Wang, B. T. Lu, X. M. Wan and J. L. Luo, Canadian Metallurgical Quarterly 50 (2011), 181-185.

 

[94] B. T. Lu, K. Wang, X. M. Wan and J. L. Luo, Correlation between Degradations of Mechanical Properties in Surface Layer and Erosion Resistance of Carbon Steel-Effects of Slurry Chemistry, Tribology International, 2012, in Revision.

 

[95] M. M. Stark, Intern. Mater. Rev. 50 (2005), 1-17.

 

[96] M. M. Stark, N. Corlett and S. Turgoose, Wear 233-235 (1999), 535-541.

 

[97] J. Jordan, Corrosion’98, Paper No. 59, NACE International, Houston, TX, New York, 1998.

 

[98] B. S. McLaurym, S. A. Shirazi, J. R. Shadley and E. F. Rybiscki, Corrosion’99, Paper No. 34, NACE International, Houston, TX, New York, 1999.

 

[99] U. Lotz, Corrosion’90, Paper No. 27, NACE International, Houston, TX, New York, 1990.

 

[100] J. S. Shadley, S. A. Shirazi, E. Dayalan, M. Ismail and E. F. Rybiscki, Corrosion 52 (1996), 714-723.

 

[101] G. M. Gutman, Mechanochemistry of Materials, Cambridge Intern. Sci. Publ., Great Abington, Cambridge, UK, 1998.

 

[102] R. G. Raicheff, A. Damajanovic and J. O. M. Bockris, J. Chemical Physics 47 (1967), 2198-2217.

 

[103] J. Wang and S. A. Shirazi, ASME J. Energy Res. Tech. 125 (2003), 21-34.

 

[104] X. Cheng, B. S. McLaurym and S. A. Shirazi, Wear 261 (2006), 715-722.

 

[105] I. Finnie, Wear 186-187 (1995), 1-10.

 

[106] G. Schmitt, P. Bosch, P. Plagemann and K. Moeller, Corrosion’02, Paper No. 244, NACE International, 2002.

 

[107] J. Postlethwaite, B. J. Brandy, M. W. Hawrylak and E. B. Tinker, Corrosion 34 (1978), 245.

 

[108] J. Postlethwaite, J. Materials Performance 26 (1987), 41-45.

 

[109] S. Aso, S. Goto, Y. Komatsu, W. Liu and M. Liu, Wear 233-235 (1999), 160-167.

 

[110] N. J. G. Chacon and F. H. Stott, Corrosion Science 35 (1993), 1045-1051.

 

[111] R. Dasgupta, B. K. Prasad, A. K. Jha, O. P. Modi, S. Das and A. H. Yegneswaran, Wear 213 (1997), 41-46.

 

[112] C. Allen and A. Ball, Tribology Intern. 29 (1996), 105-116.

 

[113] B. T. Lu, J. L. Luo and S. Chiovelli, Mater. Trans. A 37A (2006), 2029-2038.

 

[114] E. J. Wentzel and C. Allen, Intern. J. Refractory Metals and Hard Materials 15 (1997), 81-87.

 

[115] H. W. Wang and M. M. Stark, J. Materials Science 38 (2000), 5263-5273.

 

[116] G. Sundararajan, Wear 186-187 (1995), 129-144.

 

[117] K. Kato, Wear 241 (2000), 151-157.

 

[118] M. Matsumura, Y. Oka, Y. Hiura and M. Yano, ISI J. Int. 31 (1991), 168-176.

 

[119] T. A. Adlerm and R. P. Walters, Wear 162-164 (1993), 713-720.

 

[120] D. Li, X. Mao and R. Zhu, Corrosion 49 (1993), 877-884.

 

[121] Z. M. Yao and A. Bronson, Corrosion 49 (1993), 479-485.

 

[122] P. D. Bastek, R. C. Newmann and R. G. Kelly, 140 (1993), 1886-1889.

 

[123] T. G. Gooch, Welding Journal 75 (1996), 135/s-154/s.

 

[124] I. Finner, J. Wolak and Y. Kabil, J. Mater. 2 (1967), 682-700.

 

[125] I. M. Hutchings, Tribology, Friction and Wear of Engineering Material (1992), Edward Arnord.

 

[126] I. M. Hutchings, Wear 70 (1981), 688-695.

 

[127] Y. I. Oka, M. Matsumura and T. Kawabata, Wear 162-164 (1993), 688-695.

 

[128] B. W. Madson, Wear of Materials, ASME, New York, (1985), 345-354.

 

[129] B. Q. Wang, G. Q. Geng and A. V. Levy, Wear 151 (1991), 351-364.

 

[130] W. A. Metwally and M. K. Samy, Steel Research 65 (1994), 455-458.

 

[131] A. Neville, T. Hodgkiess and J. T. Dallas, Wear 186-187 (1995), 497-507.

 

[132] J. D. Majumdar and I. Manna, Mater. Sci. Eng. A 267A (1999), 50-59.

 

[133] D. J. Mills and R. D. Knutsen, Wear 215 (1998), 83-90.

 

[134] A. Toro, A. Sinatora, D. K. Tanaka and A. P. Tschiptschin, Wear 215 (2001), 1257-1264.

 

[135] B. A. Lindsley and A. R. Marder, Metall. Mater. Trans. A 29A (1998), 1071-1079.

 

[136] C. P. Tabrett, I. R. Sare and M. R. Ghomashchi, Inter. Mater. Rev. 41 (1996), 59-82.

 

[137] T. A. Adler and O. N. Dogan, Wear 225-229 (1999), 174-180.

 

[138] B. F. Levin, J. N. DuPont and A. R. Marder, Wear 181-183 (1995), 810-820.

 

[139] S. G. Sapate, A. V. R. Rao and N. K. Garg, Mater. Manufact. Process. 15 (2000), 747-759.

 

[140] T. A. Adler and O. N. Dogan, Wear 223-229 (1999), 174-180.

 

[141] J. Dodd, High-Chromium Cast Irons, Corrosion 3rd Edition, L. L. Shreir, R. A. Jarman and G. T. Burstein, Butterworth-Heinemann, Oxford, UK, (1994), 138-137.

 

[142] P. Christodoulou, A. Drotlew and W. Gutowski, Wear 211 (1997), 129-133.

 

[143] G. Laird, II, Trans. American Foundrymen’s Society 99 (1991), 339-357; 102 (1994), 497-504.

 

[144] S. Seetharamu, P. Sampathkumaran and R. K. Kumar, Wear 186-187 (1995), 159-167.

 

[145] Z. Ren, Z. Xuan and D. Sun, Weld. Res. Abroad 47 (2001), 18-23.

 

[146] R. S. Jackson, J. Iron & Steel Inst. 208 (1970), 163-167.

 

[147] A. K. Patwardhan and N. C. Jain, Metall. Trans. A 22A (1991), 1991-2319.

 

[148] V. Kumar and A. K. Patwardhan, Mater. Perform. (1993), 66-69.

 

[149] L. Valentinelli, T. Valente, F. Casadei and L. Fedrizzi, Corrosion Engineering Science and Technology 39 (2004), 301-307.

 

[150] Y. l. Saraswashi, S. Das and D. P. Mondal, Mater. Sci. Eng. A 425 (2006), 244-254.

 

[151] A. Neville, F. Reza, S. Chiovelli and T. Revega, Corrosion 62 (2006), 657-675.

 

[152] M. Bjordal, E. Bardal, T. Rogne and T. G. Eggen, Wear 186-187 (1995), 508-514.

 

[153] Y. Gao, F. Zhang, J. Xing, W. Tang and C. Bao, Journal of Xi’an Jiaotong University 35 (2001), 727-730.

 

[154] S. Das, D. P. Mondal, O. P. Modi and R. Dasgupta, Wear 231 (1999), 195-205.

 

[155] R. Colaco and R. Vilar, Wear 254 (2003), 625-634.

 

[156] A. Neville, M. Reys, T. Hodgkiess and A. Gledhill, Wear 238 (2000), 138-150.

 

[157] R. Colaco and R. Vilar, Wear 254 (2003), 625-634.

 

[158] V. A. Pugsley and C. Allen, Wear 233-235 (1999), 93-103.

 

[159] R. J. K. Wood, J. Phys. D. Appl. Phys. 40 (2007), 5502-5521.

 

[160] U. Morkrmer, R. F. Moll and M. Oechsle, Sultzer Technical Review 3-5 (2005),       12-14.

 

[161] B. T. Lu, W. S. Li, J. L. Luo and S. Chiovelli, J. Mater. Sci. (2012), 6823-6834.

 

[162] J. Postlethwaite, Corrosion 35 (1987), 475; 31 (1981), 1.

 

[163] J. Postlethwaite, Mater. Perform. 26 (1987), 41.

 

[164] M. E. Jenning, Mining Eng. (1981), 178.

 

[165] R. D. Colale, T. L. Thompson and R. P. Ehrlich, Trans. SME, AIME 260 (1976), 289.

 

[166] A. G. Osstroff, Introduction to Oilfield Water Technology, NACE, Houston, TX, (1979), 293.